Welcome to Luminux LED Lighting

Home

Products

Partners

Gallery

Contact Us

LED Information

Products > DMX & 0/1-10V Dimmer II LED Driver

	Lutron NEW Hi-lume® A-series LED Driver
	Lutron EcoSystem® 5-series LED Driver
	VA-12030M
	VA-24040D006
	VA-12300D
	VA-12100D
	VAS-24100D
	LX-12V-1200-18D
	LD-VU5012-01
	LD-CU3512-01
	LD-CU7012-01
	1-10V & PUSH Dimmable
	DMX & 0-10V Integrated Driver
	DMX RGB Dimmer III LED Driver
	DMX RGBW Dimmer IV LED Driver
	LX830 DMX512 Decoder
	LX830 DMX512 350CC Decoder
	LX830 DMX512 700CC Decoder
Download Product Catalogue

Luminux Kapego DMX & 0/1-10V Dimmer II Integrated LED Driver

Luminux is proud to introduce you the Kapego DMX and 0/1-10V DIMMER II integrated LED Driver which is a compact LED driver for all types of single or CCT LED strips. It is powered by 12/24VDC power supply (not included) with maximum output 288W. The DMX address is programmed by dip-switch and controlled by an external DMX or 0/1-10V devices. It provides 2 channels for single colour or CCT colours (warm white and cool white) LED strips. The user can control the brightness from 0-100% and control the colour temperature from warm white to cool white. It is very simple for installation and user friendly.


	Convert DMX to PWM, compatible with any DMX512 controller in accordance with USITT standard
	Built-in 2 channels, maximum loading 288W (144W X 2)
	DMX and 0/1-10V are integrated in one device for lighting circuit and connection flexibility
	One single integrated unit can be operated in 1 or 2 channels mode as single dimmer or CCT controller
	CCT Fade function is available for 0/1-10V interface in single dimmer mode
	Easy DMX address setting via DIP switches
	DMX priority detection, 12BIT DMX resolution with gamma correction for smooth dimming and CCT mixing
	PWM refresh rate of 1000Hz, suitable for TV studio standard
	Manual dimming setting is also available for Channel 1 & 2.


Model No	Luminux Kapego Dimmer II Integrated Driver
Input Power	12/24VDC
Channel	2
Maximum Load	12V (72W X 2CH=144W), 24V (144W X 2CH=288W)
Input Signal	DMX512 (1990) and 0/1-10V
DMX IN/OUT	3-pin Connectior (Data-, Data+, GND)
Switch Controller Size	L115 x W57 x H31(mm)